Automobile Based Projects

AUTOMOBILE BASED PROJECTS

Automobile Engineering is a branch study of engineering which teaches manufacturing, designing, mechanical mechanisms as well operations of automobiles, Technofist uses latest technology to implement projects related automobile

Technofist is one of the best final year project institute for implementing new ideas on automobile based technology. Technofist implements latest IEEE based project on automobile technology, get the new concepts from final year students and based on their requirements with the help of latest IEEE base paper implemente the concepts. Here is a list of project ideas for projects of Automobile Engineering. This list has been complied after referring to other project ideas that have come across the forum since last few years. If you have questions regarding these projects feel free to ask them in the replies below. You will get abstract for every topic.

TAG001
FABRICATION OF ELECTRIC BIKE (E-BIKE)

ABSTRACT--The objective of the project is to build a hybrid motorbike which will strike a right balance between fuel consumption and pollution control and can be optimized effectively for future generation motorbikes. The hybrid drive unit can be easily mounted on a bike. While the gasoline engine will drive the rear transmission, the hub motor will drive the front transmission. Contact:
 +91-9008001602
 080-40969981

BIKE PROJECT
Price - Rs 90,000/-

TAG007
FABRICATION OF ELECTRIC BIKE (E-BIKE)

ABSTRACT--The objective of the project is to build a hybrid motorbike which will strike a right balance between fuel consumption and pollution control and can be optimized effectively for future generation motorbikes. The hybrid drive unit can be easily mounted on a bike. While the gasoline engine will drive the rear transmission, the hub motor will drive the front transmission. Contact:
 +91-9008001602
 080-40969981

MOPED BIKE PROJECT
Price - Rs 75,000/-

TAG008
FABRICATION OF EFFICYCLE

ABSTRACT--za FABRICATION OF SOLAR TRICYCLE FOR PHYSICALLY HANDICAPPED PEOPLE ABSTRACT PICTURE PRICE There is increasing concern over congestion and pollution associated with the use of motor vehicle for personal transport. This project aims to design a vehicle that could be viable alternative to cars tor short distance journeys. The designed vehicle is an Ultra Light Vehicle Contact:
 +91-9008001602
 080-40969981

EFFICYCLE PROJECT
Price - Rs 65,000/-

TAG009
FABRICATION OF SOLAR TRICYCLE FOR PHYSICALLY HANDICAPPED PEOPLE

ABSTRACT--We have developed the solar tricycle especially for handicapped person Comfort of the person in the tricycle is an important and we have given importance to it. The main content of the tricycle is Solar PV panel, Brushless PMDC motor, Charge controller and battery Contact:
 +91-9008001602
 080-40969981

DC MOTOR TRANSMISSION PROJECT
Price - Rs 65,000/-

TAG006
FABRICATION OF COMPRESSED AIR VEHICLES

ABSTRACT-- As the world is hard pressed with the energy and fuel crises, compounded by pollution of all kinds, any technologies that bring out the solutions to this problem is considered as a bounty. In one of such new technologies, is the development of a new engine called as compressed air Contact:
 +91-9008001602
 080-40969981

FOUR WHEELS PROJECT
Price - Rs 60,000/-

TAG008
- FABRICATION OF ELECTRIC CAR

ABSTRACT--The vehicle is moved using hub motor which is fixed at the back wheel. There will be a accelerator pedal for the acceleration of the vehicle and brake pedal is placed Contact:
 +91-9008001602
 080-40969981

E-CYCLE PROJECT
Price - Rs 60,000/-

TAG008
- FABRICATION OF ATTACHABLE WHEELCHAIR AUTOMATOR

ABSTRACT--Improved bullock carts will be durable (more than 25 years), which will provide better economy to the farmers or poor people for whom the bullock carts are meant for livelihood. Mechanism used in the project is as follows 1)Tilting The base of the bullock cart is rotated with the help of bevel gears and axle drive mechanism operated by the handle and lever. 2) Lifting The base of the bullock cart is lifted with the help of universal joint which is connected to lead screw which is operated by rotating the handling. Contact:
 +91-9008001602
 080-40969981

WHEELCHAIR AUTOMATOR WITH HUB MOTOR
Price - Rs 50,000/-

TAG007
FABRICATION OF ELECTRIC BIKE (E-BIKE)

ABSTRACT--The main aim of this review paper is to present the idea of harnessing the various energy and use it in todays existence of human life .Now-a-days there are so many vehicles on road, which consumes more fuel and also hazards our environment. Contact:
 +91-9008001602
 080-40969981

E-CYCLE PROJECT
Price - Rs 35,000/-

TAG003
FABRICATION OF AIR BRAKE EXHAUT SYSTEM

ABSTRACT-- The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive. Here we are placing a turbine in the path of exhaust from the engine. The turbin e is connected to a dynamo by means of coupling, which is used to generate power. Contact:
 +91-9008001602
 080-40969981

THREE WHEELS PROJECT
Price - Rs 32,000/-

TAG001
FABRICATION OF PNEUMATIC BUMPER WITH INTELLIGENT BRAKING SYSTEM

ABSTRACT-- The aim is to design and develop a control system based on intelligent electronically controlled automotive braking system is called “PNEUMATIC BUMPER WITH RESVERSE BRAKING SYSTEM”. Sensor Operated Pneumatic Brake consists of UR transmitter and Receiver circuit, Control Unit, Pneumatic breaking system. The UR sensor is used to detect the obstacle. There is any obstacle in the path, the UR sensor senses the obstacle and giving the control signal to the breaking system.Contact:
 +91-9008001602
 080-40969981

FOUR WHEELS PROJECT
Price - 24,000/-

TAG002
FABRICATION OF PNEUMATIC BUMPER WITH INTELLIGENT BRAKING SYSTEM

ABSTRACT-- The aim is to design and develop a control system based on intelligent electronically controlled automotive braking system is called “PNEUMATIC BUMPER WITH RESVERSE BRAKING SYSTEM”. Sensor Operated Pneumatic Brake consists of UR transmitter and Receiver circuit, Control Unit, Pneumatic breaking system. The UR sensor is used to detect the obstacle. There is any obstacle in the path, the UR sensor senses the obstacle and giving the control signal to the breaking system.Contact:
 +91-9008001602
 080-40969981

SINGLE WHEELS PROJECT
Price - Rs 20,000/-

TAG004
FABRICATION OF AIR BRAKE EXHAUT SYSTEM

ABSTRACT-- The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive. Here we are placing a turbine in the path of exhaust from the engine. The turbin e is connected to a dynamo by means of coupling, which is used to generate power. Contact:
 +91-9008001602
 080-40969981

SINGLE WHEELS PROJECT
Price - Rs 25,000/-

TAG005
FABRICATION OF COMPRESSED AIR VEHICLES

ABSTRACT-- As the world is hard pressed with the energy and fuel crises, compounded by pollution of all kinds, any technologies that bring out the solutions to this problem is considered as a bounty. In one of such new technologies, is the development of a new engine called as compressed air Contact:
 +91-9008001602
 080-40969981

SINGLE WHEELS PROJECT
Price - Rs 30,000/-

TAG001
FABRICATION OF AUTOMATICTYRE INFLATION SYSTEM

ABSTRACT-- The main aim of our project is to develop a “Automatic tyre inflation and deflation system” .This can be placed in all automobiles while long drives and that can be utilized while climbing uphill or down hills. It is very necessary for the every automobile to be cautious while driving through long distances. Contact:
 +91-9008001602
 080-40969981

AUTOMATICTYRE INFLATION PROJECT
Price - Rs 24,000/-

TAG002
FABRICATION OF ZERO RADIUS TURNING VEHICLE

ABSTRACT--The aim of this paper is to develop an alternative solution for conventional two wheel steering system .In modern era, the major characteristics of the vehicle like steer ability and handling have become major aspects. Conventional steering involve either the Ackerman or Davis steering system which has major disadvantage is it can't take minimum radius turn. Contact:
 +91-9008001602
 080-40969981

TURNING VEHICLE PROJECT
Price - Rs 22,000/-

TAG007
FABRICATION OF 3 AXIS PEUMATIC TRAILER

ABSTRACT--This project work titled -Three axis pneumatic modern trailer| has been conceived having studied the difficulty in unloading the materials. Our survey in the regard in several automobile garages,revealed the facts that mostly some difficult methods were adopted in unloading the materials fromthe trailer. The trailer will unload the material in only one single direction. It is difficult to unload. Contact:
 +91-9008001602
 080-40969981

APEUMATIC TRAILER PROJECT
Price - Rs 22,000/-

TAG008
FABRICATION OF TWO WHEELER FORKLIFT FOR MATERIAL HANDLING

ABSTRACT--The two Wheel Automatic Electric forklift is a small electrical vehicle designed to build a cheap forklift for industry warehouses& domestic purpose. A goods transportation device which can drive by any one. Safe movement during picking, stacking and traveling with loads. The dynamics of the vehicle is simple to the control the vehicle which means that it is stable. Contact:
 +91-9008001602
 080-40969981

FORKLIFT PROJECT
Price - Rs 22,000/-

TAG008
- FABRICATION OF ATTACHABLE WHEELCHAIR AUTOMATOR

ABSTRACT--Improved bullock carts will be durable (more than 25 years), which will provide better economy to the farmers or poor people for whom the bullock carts are meant for livelihood. Mechanism used in the project is as follows 1)Tilting The base of the bullock cart is rotated with the help of bevel gears and axle drive mechanism operated by the handle and lever. 2) Lifting The base of the bullock cart is lifted with the help of universal joint which is connected to lead screw which is operated by rotating the handling. Contact:
 +91-9008001602
 080-40969981

WHEELCHAIR AUTOMATOR WITH DC MOTOR
Price - Rs 25,000/-

TAG001
FABRICATION OF MOTORIZED VOICE OPERATED STANDING WHEEL CHAIR

ABSTRACT--It is inevitable for any country to have people with disabilities or have trouble with standing up, especially arthritis patients. The most common used devices for disabled people are wheelchairs. What’s more, the life quality of disabled people and patients has caught attention by society. Modernized wheelchair has become a popular engineering challenge for decades. Contact:
 +91-9008001602
 080-40969981

VOICE OPERATED STANDING WHEEL CHAIR WITH SWITCHES
Price - Rs 20,000/-

TAG002
FABRICATION OF PNEUMATIC ENGINE

ABSTRACT--The Compressed-air engine as a pneumatic actuator that converts one form of energy into another. The Air Driven Engine is an eco-friendly engine which operates with compressed air. This Engine uses the expansion of compressed air to drive the pistons of the engine. An Air Driven Engine is a pneumatic actuator that creates useful work by expanding compressed air. There is no mixing of fuel with air as there is no combustion. Contact:
 +91-9008001602
 080-40969981

PNEUMATIC ENGINE
Price - Rs 28,000/-

TAG001
FABRICATION OF MOTORIZED VOICE OPERATED STANDING WHEEL CHAIR

ABSTRACT--It is inevitable for any country to have people with disabilities or have trouble with standing up, especially arthritis patients. The most common used devices for disabled people are wheelchairs. What’s more, the life quality of disabled people and patients has caught attention by society. Modernized wheelchair has become a popular engineering challenge for decades. Contact:
 +91-9008001602
 080-40969981

VOICE OPERATED STANDING WHEEL CHAIR WITH BLUETOOTH
Price - Rs 22,000/-

TAG007
FABRICATION OF VEHICLE SAFETY USING POWER WINDOW MECHANSIM

ABSTRACT--We have seen how severe is bus disasters on fire, accident etc, to avoid causalities and human lives here we are proposing power window mechanism. On sensing any danger in the form of fire and smoke the window automatically will slide down making way for passenger way out from the vehicle. Contact:
 +91-9008001602
 080-40969981

SAFETY PROJECT
Price - Rs 18,000/-

 

download abstract

FOR AUTOMOBILE BASED PROJECTS